Software MPA CTplus

• For the first time Cutometer^® and all other C+K probes can be operated in one software easily and conveniently.
• Software works with any MPA systems and Cutometer^® Dual MPA 580 as well as Multi Display Devices (MDD) and supports several devices at the same time. It also supports the Meibometer^® MB 560.
  

MPA 6

MPA 10

Cutometer® Dual MPA 580

MPA 2

Multi Display Device MDD

• Convenient, intuitive, modern software, easy to navigate.
• Perform free measurements anywhere, with any probe in any order or use the study manager to design your study and save as many clicks & as much time as possible.
• Easy organization of the measurements in sessions and takes.
• Graphical display of the measurements and numerical result values side by side.
• When the Ambient Condition Sensor RHT 400 is connected, relative humidity and temperature are constantly recorded and saved with the measurements.

• Tags: new, modern way of identifying measurements in the database.
• All information go into the database, convenient possibility of filtering the data you want to export for statistical analysis with special export assistant.
• Easy and self-explanatory check calibration function for the probes with report.
• New, exciting additional aging-parameters for the Cutometer^®.
• Graphic explanation of complex results.
• Intelligent software displaying messages useful for handling or servicing the probe.

To facilitate your work, the measurement window is organized as a session. A session corresponds to measurements on one subject in a point in time (T).

A session can consist of several takes. A take is the measurement with one probe on one skin area. In one take several measurements can be performed, e.g. 3 measurements on adjacent skin areas.
Thus all measurements for a subject in T can be performed quickly and easily.

• Create a study beforehand: designed to make life easy and save time during work as only a minimum of clicks is needed.
• Select probe(s) for one session (subject/T) & configure their use.
• Select number of measurements per probe/site, e.g. 3 Corneometer^® measurements at adjacent sites. Then, after the 3 measurements are performed, automatically the next measurement window (here Cutometer^®) will open.
• Tag the different takes: e.g. with skin area, product type, etc. When measurements are performed their identification tags are automatically added.
• Attach files to your study (e.g. explanations for the operator, photos about application of products or sketches of the measurement set-up, etc.). Those files can be opened for further information in the measurement menu.
• Add subjects beforehand or anytime during your work in the program. Once created, they will be available for all sessions.

Modern, easy and quick way to identify measurements in the database. Examples for tags: product/control, skin site, explanation of the respective T, concentration of active ingredient, etc.
Create tags anytime during your work in the program. Once created, they are available for all measurements.

The software MPA CTplus offers a function (optionally) to show measurements on one skin area which are out of a certain range (with regards to the average) in a different color. Thus you can identify possible artefacts (e.g. probe was placed incorrectly or a hair got in the way, etc.) and delete/replace them.

• All information about the measurements (results, probe settings, operator, etc.) go into the common database.
• Select measurements there and view them in detail together with their results side by side.
• Sort and filter the sessions to export them into an Excel^® spreadsheet (e.g. by a certain study, by person(s), by probe or time period).
• A sophisticated export assistant function allows you to only export those results that you really want to work on statistically (e.g. only averages or only certain parameters).
• The created Excel^®-files contain the results of all measurements and if needed also raw data of curves, charts and images of the measurements.

• Modern software that is easy to navigate.
• Perform free measurements with all available probes or design your study in advance to save time with as few clicks as possible.
• Clear organization of measurements into sessions and takes.
• Graphical display of measurements and result values side by side.
• The program's database contains all information about the measurements. Conveniently filter out the data you want to export for statistical calculations.
• Simple, illustrated step-by-step check calibration* function for the probes** with storable report.
• and much more ...

The software is license-based and a license for MPA CTplus comes with every MPA/MDD system (a license for MPA WLplus with every Radio Recever RR 200 unit). Download the software for a 10 days trial from our download section for registered customers.

Ask for a license offer now.

To work with the program, you will need a computer with the following configuration:

Windows^® 10/11

• Screen resolution: minimum 1280 x 720, recommended 1920 x 1080
• USB 2.0 / 3.0 connection(s)
• CPU: Intel i3/i5/i7 3^rd generation, AMD Phenom II X4, or higher
• Optional dedicated graphics card for smoother curve visualization
• RAM: 4GB
• a programme to open Microsoft Excel^® files is recommended to see exported results

The software MPA CTplus supports all C+K probes:

• Cutometer^® MPA 580
  
• Corneometer^® CM 825
• Sebumeter^® SM 815
• Mexameter^® MX 18
• Tewameter^® TM Hex
• Tewameter^® TM 300
• Skin-Glossymeter GL 200
• Skin-pH-Meter pH 905
• Skin-Colorimeter CL 400
• Skin-Thermometer ST 500
• Indentometer IDM 800
• Frictiometer FR 700
• Tewameter^® TM Nano
• Tewameter^® TM Triple 330T
• Invitro Tewameter^® VT 310
• Meibometer^® MB 560
• Ambient Condition Sensor RHT

The programme MPA WLplus supports all C+K wireless probea:

• Corneometer^® CM 825 WL
• Mexameter^® MX 18 WL
• Tewameter^® TM 300 WL
• Skin-Thermo-Meter ST 500 WL
• Skin Glossymeter GL 200 WL
• Skin-Colorimeter CL 400 WL
• Skin-pH-Meter PH 905 WL